This is a combination of clee Beefy Front Idlers and Beefy Z Idlers + Hartk XY joints / AB Pins Mod.
Hardware included:
- 12× M5×40 SHCS
- 4× M5×30 BHCS
- 12× M5 hex nuts
- 2× M3 t-nuts
- 2× M3×16 BHCS
- 2 × 5mm-diameter pin, 18mm long (BFI front idlers)
- 4 × 5mm-diameter pin, 22mm long (BFI z idlers)
- 2 x 5mm-diameter pin, 28mm long (Hartk pins AB)
- 2 x 5mm-diameter pin, 30mm long (Hartk pins AB)
- 4 x 5mm-diameter pin, 40mm long (Hartk pins XY joints)
No idlers or bearings are included.
If you want to install Z beefy and Daylight Led sticks you need these custom printed parts by ScorpSoul
Authors and credits: https://github.com/clee/VoronBFI and https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/hartk1213/Voron2.4_Trident_Pins_Mod
