This MOD is a great help to achieve a consistent first layer!
We created an hardware kit with everything you need to create 2 probes because it’s always a good pratice to have a spare around!
Included:
- 2x Omron D2F-L microswitch withou lever
- 4x M2x10mm self tapping screw
- 14x Magnets 6x3mm N35
- 2x 1,70 meter Original Helukabel Heluflon 24AWG cable
- 4x m3x16 screw
- 2x m6x12 screw
- 2x Heat inserts M3 5x4mm
- 1x drop in 3030 t-nut m6
Check the author JoSar page in here https://github.com/jlas1/Klicky-Probe/tree/main/Printers/Ratrig/VCore3 and spend a good 10 minutes reading everything.
There is also a great guide in here: https://3dpandme.com/2022/02/24/klicky-probe-officially-released-for-vcore3/ from “3DP and Me”.
