RJ11 to 4 Pin Screw

6,00 

Availability: In stock and ready to ship!

RJ11 to 4 Pin Screw Terminal Block adpater

Ideally used to connect the Cable Harness from a CAN setup to the RJ11 port from the BTT Octopus Board with USB to CAN bus bridge mode enabled.

What do you need to upgrade to a CAN setup?

CAN toolhead board EBB36 SB2209
CAN adapter (connects the toolhead to the RPI and interprets the data) U2C or PiCAN (cheaper). If you don’t want to use a can adapter and you want to connect the toolhead directly to the mothboard, use a RJ11 to 4 Pin and reflash the board accordingly (we don’t recommend this alternative) U2C or PiCAN (cheaper). If you don’t want to use a can adapter and you want to connect the toolhead directly to the mothboard, use a RJ11 to 4 Pin and reflash the board accordingly (we don’t recommend this alternative)
Y endstop realocation (removes the dragchains from the gantry and leave the z axis dragchain) github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Minsekt/Rear_Umbilical/Y_Endstop_Relocation or github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%202-Trident/2.4/Voron2.4_Y_Endstop_Relocation github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Minsekt/Rear_Umbilical/Y_Endstop_Relocation or github.com/hartk1213/MISC/tree/main/Voron%20Mods/Voron%202-Trident/2.4/Voron2.4_Y_Endstop_Relocation
CW2 / Motor cable glands Mount printables.com/model/464735-pg7-cnlinko-lp-12-mount-for-sb2209-sb2240 or github.com/hartk1213/MISC/blob/main/Voron%20Mods/Voron%202-Trident/2.4/CW2_CAN_Umbilical/STLs/CW2/cw2_umbilical_m12.stl or github.com/hartk1213/MISC/blob/main/Voron%20Mods/Voron%202-Trident/2.4/CW2_CAN_Umbilical/STLs/CW2/cw2_umbilical_cnlink0_threaded_mount_LP12.stl printables.com/model/464735-pg7-cnlinko-lp-12-mount-for-sb2209-sb2240 or github.com/hartk1213/MISC/blob/main/Voron%20Mods/Voron%202-Trident/2.4/CW2_CAN_Umbilical/STLs/CW2/cw2_umbilical_m12.stl or github.com/hartk1213/MISC/blob/main/Voron%20Mods/Voron%202-Trident/2.4/CW2_CAN_Umbilical/STLs/CW2/cw2_umbilical_cnlink0_threaded_mount_LP12.stl
A Drive cable glands mount printables.com/model/345529-voron-24r2-a-drive-pg7-umbilical-mount-remix/files printables.com/model/345529-voron-24r2-a-drive-pg7-umbilical-mount-remix/files
Toolhead specific fixing fixing mount behind round pancake stepper motor github.com/KayosMaker/CANboard_Mounts/blob/main/STLs/BTT_EBB36_1.0_Mounts/BTT_EBB36_1.0_mounts_plain/EBB36%201.0%20sherpa%20mini%20mount.stl github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/CW2%20Cable%20Bridge.STL github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/Cable%20Clip%20Printed%20Part.STL github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/Cable_Cover_for_Pcb_v1.1.STL github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/Printed%20Part%20for%20CAN%20Cable.stl github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/Printed_Part_for_CAN_Cable_v1.1.stl github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/cable_door_EBB_SB.stl github.com/bigtreetech/EBB/blob/master/EBB%20SB2240_2209%20CAN/Custom%20Printed%20Parts/main_body_EBB_SB.stl
github.com/VoronDesign/Voron-Stealthburner/blob/main/STLs/Clockwork2/%5Ba%5D_pcb_spacer.stl
Electronics Bay U2C github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Electroleon/U2C_Mounting or PiCAN github.com/xbst/PiCAN/tree/master/Shell U2C github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Electroleon/U2C_Mounting or PiCAN github.com/xbst/PiCAN/tree/master/Shell
Stealthburner github.com/VoronDesign/Voron-Stealthburner github.com/VoronDesign/Voron-Stealthburner
Cables 2x 0,25mm heluflon for DATA + 2x 0,5mm heluflon for 24v and GND. If you are using a RAPIDO hotend please consider 1mm heluflon for 24v and GND. Twist the DATA cables along both connections. 2x 0,25mm heluflon for DATA + 2x 0,5mm heluflon for 24v and GND. If you are using a RAPIDO hotend please consider 1mm heluflon for 24v and GND. Twist the DATA cables along both connections.
Cable Sleeve 2x meters of cable sleeve 2x meters of cable sleeve
Cable Glands to go into the mounts 2x fancy LP12 4Pin with quick connect and release or 2x fixed PG7 M12 1x fancy LP12 4Pin with quick connect and release or 2x fixed PG7 M12

 

Customers also bought

Shopping Cart
RJ11 to 4 Pin Screw
6,00 

Availability: In stock and ready to ship!