Designed and open-sourced by Christoph Muller, the v0.1 round pancake passive board is designed to allow the connection of 5v or 24v fans by cut and trace solder pads and also the possibility to connect 1 auxiliary interface such as klicky probe mod.
Allows you to save 4 wires from the toolhead to the board.
Best suitable for Voron v0.1
Along with this order you will receive all the components necessary to connect this PCB to your wire harness, including:
- 1x 2×7 microfit female connector
- 1x 2×1 microfit female connector
- 4x 2 pin jst-ph 2.0mm
- 2x 3 pin jst-ph 2.0mm
- 1x 4 pin jst-ph 2.0mm
- 16x microfit female crimp terminals + 2 extra
- 18x jst-ph female crimp terminals + 2 extra
This item is fully soldered and in ready condition to be used.
Author and info: https://github.com/christophmuellerorg/voron_0_pancake_board
